基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

聚乳酸组织工程支架结构的精密调控

采用糖球模板法结合热致相分离技术,制备了孔径尺寸、内连通度及孔隙率高度可控的左旋聚乳酸(PLLA)支架材料,并通过扫描电镜(SEM)、红外光谱(FTIR)以及示差扫描量热法(DSC)对其空间结构及性能进行了系统研究.支架材料孔径从50μm到800μm及内连通孔径从10μm到200μm连续可调,微观孔壁结构根据不同溶剂可形成各异的微纳米结构.支架的制备对PLLA化学结构无显著影响,但相分离过程会不同程度地降低PLLA的结晶度.     

Host–Guest Chemistry between Perylene Diimide (PDI) Derivatives and 18‐Crown‐6: Enhancement in Luminescence Quantum Yield and Electrical Conductivity

Perylene diimide (PDI) derivatives exhibit a high propensity for aggregation, which causes the aggregation‐induced quenching of emission from the system. Host–guest chemistry is one of the best‐known methods for preventing aggregation through the encapsulation of guest molecules. Herein we report the use of 18‐crown‐6 (18‐C‐6) as a host system to disaggregate suitably substituted PDI derivatives in methanol. 18‐C‐6 formed complexes with amino‐substituted PDIs in methanol, which led to disaggregation and enhanced emission from the systems. Furthermore, the embedding of the PDI ? 18‐C‐6 complexes in poly(vinyl alcohol) (PVA) films generated remarkably high emission quantum yields (60–70 %) from the PDI derivatives. More importantly, the host–guest systems were tested for their ability to conduct electricity in PVA films. The electrical conductivities of the self‐assembled systems in PVA were measured by electrochemical impedance spectroscopy (EIS) and the highest conductivity observed was 2.42×10^?5 S cm^?1.     

Thermally driven self-healing PEDOT conductive films relying on reversible and multiple Diels–Alder interaction

Thermally healing capability of cracks and defects is important and urgent for the safe operation and life extending of electric materials and devices. Here, by the combination of thermally driven reversible Diels–Alder (DA) interaction and in-situ chemical oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT), a series of intrinsically conductive poly(3,4-ethylenedioxythiophene) (PEDOT)/DA composites possess intrinsically self-healing property under low-temperature (reverse DA reaction at 100°C; DA crosslinking at 60°C) stimulus were achieved. The crosslinking DA bonding reactions are multiple from the co-existence of pre-synthesized macromolecular polyurethane attached DA units (PU-DA) and 2,4-hexadiyne-1,6-diol (DADOL) in the films. PU-DA involved in the polymerization process of EDOT to endow PEDOT with outstanding solution-processability, uniform film making, and structural self-healing capability, while DADOL was added to enhance the cross bonding between polymer chains. This work will accelerate the research and application development of intrinsically self-healing conducting polymers for commercial capacitors, antistatic coatings, implantable, printable electronics, and so on.     

d-Orbital Reconstructions Forced by Double Bow-Shaped Deformations and Second Coordination Sphere Effects of Cu(II) Heme Analogs in HER**

Both geometric architecture and electronic configurations of heme proteins contribute to its activity. In this work we designed and synthesized a series of four copper(II) porphyrin complexes ( 4 -, 3 -, 2 - and 1 -Cu) where the molecular conformations are modulated by a pair of stepwise shortened straps on the same porphyrin side (cis-ortho) to give double bow-shaped skeletons. Single crystal structures demonstrate that the straps gradually increase the saddle deformation and the deviation of the metal centers, which is in accordance with two, unusual d-orbital reconstructions of two different ground states, as revealed by 4 K EPR and DFT calculations. In the study of the electrocatalytic hydrogen evolution reaction (HER), 1 -Cu, with the shortest straps, showed the most apparent improvement of activity. Second coordination sphere (SCS) effects created by the double bow-shaped architecture and the strong saddle porphyrin core in 1 -Cu are found to play key roles in proton trapping during the catalytic process. The work contributes a novel strategy to improve the catalytic performance of heme analogs through ligand geometric modulation.     

A note on the spheroidal modes vibration of an elastic sphere in linear viscoelastic fluid

Vibration characteristics of elastic nanostructures embedded in fluid medium have been used for biological and mechanical sensing, and also to investigate materials mechanical properties. An analytical approach based on the exact theory has been developed in this paper, to establish a new accurate and simple generalized frequency equation to predict spheroidal vibration of an elastic nanosphere, in a compressible viscoelastic fluid using linear Maxwell fluid model. To demonstrate the accuracy of the present approach, a comparison is made with the published theoretical results in the literature in some particular cases, which shows a very good agreement. Thus, the obtained frequency equation can be very useful to interpret the experimental measurements of vibrational dynamics of nanospheres and can serve as benchmark solution in design of liquid sensors.